Introduction

Mixing barrel is the key equipment by the moving impeller rotation by the motor v-belt drive on behalf of the drugs and pulp fully mixed, and increasing the pharmaceutical role reaction time which is useful to strength the quality of drug reaction. Mixing vat can be used in ore dressing industry, which also can be applied to some kinds of industrial mixing. Agitation vat us suitable to all kinds of metal ore, especially for the mixing before the ore dressing, which is just the full mixing of pharmaceutical and sufficiently slurry can also be the mixing of the other non metal material. The using concentration cannot be greater than 30 %( by weight), and the particle size of the fixed component is less than 1mm. the form of it is the flat bottomed bucket radiation cycle with the spiral impeller mechanical agitation.

1. Compact structure, good seal, and feed port settings the block gray board, to prevent the mist playing.

2. Stir mixing blades fanned when stirred media contact area.

3. The nozzle row set, more water is uniform and can adjust.

4. Leftover ash and low settings box at the bottom of the watershed to ensure that the equipment no dead ends.

5. Mine mixing tube equipment advanced performance, the quality of the finished product is stable, stir rapid discharge.

The Working Principle and Application of Mixing Vat:

Mixing barrel is the key equipment by the moving impeller rotation by the motor v-belt drive on behalf of the drugs and pulp fully mixed, and increasing the pharmaceutical role reaction time which is useful to strength the quality of drug reaction. Mixing vat can be used in ore dressing industry, which also can be applied to some kinds of industrial mixing. Agitation vat us suitable to all kinds of metal ore, especially for the mixing before the ore dressing, which is just the full mixing of pharmaceutical and sufficiently slurry can also be the mixing of the other non metal material. The using concentration cannot be greater than 30 %( by weight), and the particle size of the fixed component is less than 1mm. the form of it is the flat bottomed bucket radiation cycle with the spiral impeller mechanical agitation.

Instruction for usage: to fasten the pump body parts bolts before the usage, and then to inspect the rotating shaft whether it is flexible or not, and to start motor are the main procedures in the inspecting content. Some fragile part pieces of the machine are the impeller and stator.

Technical data